Skip to content

Troubleshooting

USB Permission denied error

When you use Powermon to access a USB device on Linux, you may run into Permission denied error. It’s because by default, the device nodes are owned by root. To run Powermon as a non-root user, you have to change the permissions of the device nodes with udev rules .

First, run Powermon as root to confirm that you can talk to your inverter or BMS:

sudo powermon -C inverter-conf.yaml

Where inverter-conf.yaml is the path to your YAML config.

After running the above command, you should see the values from your device, according to the settings in the YAML config file. If not, make sure that the cable is plugged in on both ends and that you chose the right device.

udev rules - basic

For everyday monitoring, don’t run it as root. Instead, change the permissions with udev rules:

  1. Create file 60-powermon-usb.rules in the etc/udev/rules.d directory if it doesn’t exist:

sudo touch /etc/udev/rules.d/60-powermon-usb.rules

  1. Open the file with a text editor (for example nano):

sudo nano /etc/udev/rules.d/60-powermon-usb.rules

  1. Paste the following lines:

  2. for devices connected through hidraw:

KERNEL=="hidraw[0-9]*", SUBSYSTEM=="hidraw", MODE="0666"

  • for devices connected through ttyUSB:

KERNEL=="ttyUSB[0-9]*", MODE="0666"

  1. Save the file.

  2. Reload the udev rules:

  3. sudo udevadm control --reload-rules

  4. sudo udevadm trigger

  5. Run Powermon as a regular user to confirm it’s working:

  6. powermon -C inverter-conf.yaml

This rule makes any hidraw and ttyUSB devices to be readable and writable by any user on the system.

udev rules - advanced

Such broad permissions are not always desirable. You can use more restrictive permissions by targeting specific vendor and product IDs:

  1. Find the vendor and product IDs:

  2. lsusb

  3. If you see multiple devices, unplug your cable, run lsusb again, and compare which devices are missing. Note the device IDs and name.

  4. List the attributes of the specific device:

    1. udevadm info --attribute-walk --path=$(udevadm info --query=path --name=/dev/ttyUSB0)
      • replace /dev/ttyUSB0 with your device.
    2. look for ATTRS{idProduct}== and ATTRS{idVendor}== that match the IDs from your previous lsusb command.
    3. In our case we found ATTRS{idProduct}=="7523" and ATTRS{idVendor}=="1a86".

  5. Create file 60-powermon-usb.rules in the etc/udev/rules.d directory if it doesn’t exist:

  6. sudo touch /etc/udev/rules.d/60-powermon-usb.rules

  7. Open the file with a text editor (for example nano):

  8. sudo nano /etc/udev/rules.d/60-powermon-usb.rules

  9. Edit the file. If there are existing rules for the matching device, remove them.

  10. In our case, we’re editing dev/ttyUSB0 rules

  11. We replace the existing line KERNEL=="ttyUSB[0-9]*", MODE="0666" with KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE="0660", TAG+="uaccess"
  12. By providing the exact vendor and product ID, we limit the rule to a specific device.
  13. Note the MODE is now 0660 (zero at the end).
  14. TAG+="uaccess" makes the device usable to logged-in users.

  15. In the future, if you replace the cable, you might need to change the vendor and product ID.

  16. Save the file.

  17. Reload the udev rules:

  18. sudo udevadm control --reload-rules

  19. sudo udevadm trigger

  20. Run Powermon as a regular user to confirm it’s working:

  21. powermon -C inverter-conf.yaml